How To Apply Dc Fix To Kitchen Worktop

On our blog you will find easy DIY projects for you to copy tutorials and important.

How to apply dc fix to kitchen worktop. You want to make sure that the surface is free from any grease dirt dust etc. Using a carpenters square position it about 5mm in from the edge and mark with a pencil. Clean the surface thoroughly to remove grease and dust.

Can be repositioned during application. Start off by removing doors and handles. But be careful not to overstretch the film.

Measure and cut the film to size leaving enough excess to wrap around the front edge of the worktop. Apply PVA adhesive or an appropriate contact adhesive along the edge of the exposed composite fibreboard. I was initially planning on doing my worktops in two large.

Cover the surface of the worktop with masking tape to protect it from any excess adhesive. To do that heat up the film using a hair dryer on the lowest setting and pull it around the edges you want to cover then press down. Here you will find all sorts of inspiration for our famous d-c-fix decorative and glass films.

This will ensure that the film sticks to your surface. Hello and welcome to the d-c-fix blog for the US. Quick easy and budget-friendly DIY kitchen refresh.

I have partnered up with Create Your World Ltd for this video. Re-oil using Rustins Danish Oil. Use a sharp blade such as a utility knife to trim the back edge off and you will be left with a totally square edge to work with.