How To Apply Dc Fix To Worktops

Apply PVA adhesive or an appropriate contact adhesive along the edge of the exposed composite fibreboard.

How to apply dc fix to worktops. Here you will find all sorts of inspiration for our famous d-c-fix decorative and glass films. Just push out the air bubbles using the smoother or squeegee. Its not difficult to apply try and cut down to more manageable sizes and absolutely buy the fitting kit for the smoothing tool.

So they are a great alternative to blinds or net curtains. We recommend using a dc fix application kit containing a scalpel and smoothing tool to make the job easier. Use the handy grid on the backing paper as a cutting guide.

Lastly a spray bottle with warm water with a few drops of washing up liquid mixed in and a hairdryer or heat gun for surfaces where edges need to be wrapped. Clear the surfaces and thoroughly clean. A hairdryer can be used on curved surfaces to make the vinyl more pliable.

Measure the length of your worktop and measure on the back of the SBP using the grid as a guide. Available in various widths and lengths to suit your project our peel stick plain vinyl wraps can be fitted by you on a. Starting at one end of the worktop peel back a small section of the.

But be careful not to overstretch the film. Available in various widths and lengths to suit your project our peel stick plain vinyl wraps can be fitted by you on a. Authentic dc fix vinyl wrap wood designs breathe new life into dreary doors and drawers worn out worktops breakfast bars and tired tabletops.

The vinyl has a water-based adhesive so can be removed fully and reapplied if you mess up. You want to make sure that the surface is free from any grease dirt dust etc. If the film is warm it is easy to apply around corners and edges.