Why Is My Sink Sprayer Weak

If the water flow out of the hose is weak the diverter is to blame.

Why is my sink sprayer weak. Remove the sink sprayer head and turn on the faucet. If your sprayer produces a pulsating spray or water continues to come out of the main spout while you are using the sprayer a faulty diverter is also probably the cause. As you will see cleaning out the cartridge is a little more involved than cleaning the aerator.

If water comes out of the hose the sprayer is probably clogged with mineral deposits. As a rule the diverters located in fromt of the valve under the spout see image. While mineral deposits can build up and damage the sprayer a damaged or clogged diverter is the likely cause of a sprayer that wont spray.

If your kitchen sink is stuck on spray mode the problem is most likely related to a faulty diverter clogged screens or a faulty spring. There are times however when a kitchen sink sprayer can give you problems the biggest of which is when the faucet sprayer is stuck on spray mode. A bad sprayer head can cause this but more often the diverter is the culprit.

If the water flow out of the hose is weak the diverter is to blame. If you have hard water the head may be clogged with minerals. If the water flowing out of the hose is weak then the diverter is to blame.

Examine the sprayer to see if it is possible to figure out what is making it spray poorly. Normally as you know using the faucet shouldnt affect the sprayer. I assumed I needed to replace the actual sprayer but at the store there was mostly kits that included the hose.

To check this remove the sink sprayer head and turn on the faucet. To check this remove the sink sprayer head and turn on the faucet. Water will continue moving out of the faucet spout when using the sink sprayer.